Quantcast
Channel: ToManual.com » Search Results » 2003 ford excursion stereo wiring diagram
Viewing all articles
Browse latest Browse all 10

2005 Ford Mustang GT Roush Fog Lamp Wiring Harness Installation Instructions

0
0

Download 1. SAFETY REQUIREMENTS STOP! READ IMPORTANT SAFETY CAUTIONS AND WARNINGS BEFORE PROCEEDING. IMPORTANT SAFETY NOTICE Appropriate disassembly, assembly methods and procedures are essential to ensure the personal safety of the individual performing the kit installation. Improper installation due to the failure to correctly follow these instructions could cause personal injury or death. Read each step of the installation manual carefully before starting the actual installation. 1. Always wear safety glasses for eye protection. 2. Place ignition switch in the OFF position. 3. Always apply the parking brake when working on a vehicle. 4. Block the front and rear tire surface to prevent unexpected vehicle movement. 5. Operate the engine only in well-ventilated areas to avoid exposure to carbon monoxide. 6. Do not smoke or use flammable items near or around the fuel system. 7. Use chemicals and cleaners in well-ventilated areas. 8. Batteries produce explosive gases, which can cause personal injury. Therefore, do not allow flames, sparks or flammable substances to come near the battery. 9. Keeps hands and any other objects away from the radiator fan blades. 10. Keep yourself and your clothing away from moving parts when the engine is running. 11. Do not wear loose clothing or jewelry that can get caught in rotating parts or scratch surface finishes. Fog Lamp Wiring Harness Installation 1. Open the vehicle hood and remove the black plastic panel on top of the radiator. 2. Lay out the Roush wiring harness in the engine compartment according to the following diagram. 3. Disconnect the production Ford wiring harness from the Ford fog lamps. 4. On the new harness, plug Roush connector C2 and C4 into the Ford fog lamp wiring harness. 5. Plug Roush connector C1 and C3 into the Ford fog lamps. 6. Plug Roush connector C5 and C6 into the Roush fog lamps. 7. Connect the ground on the Roush wiring harness using the existing Ford ground bolt on the radiator core support. (see diagram 1) 8. Using the (2) screws provided, attach the Roush Relay Module to the driver’s side strut tower. (see diagram 1) 9. Zip the Roush wiring harness to the Ford wiring harness and to the hood release cable beside the strut tower. (see diagram 1) 10. Re-install the black plastic panel on top of the radiator. 3. Roush Fog Lamp Switch Installation 1. Remove the driver’s side front wheel and front wheel well liner (see figure A). Figure A 2. Route the Roush wiring harness from the engine compartment to the grommet in the front wheel well.

The post 2005 Ford Mustang GT Roush Fog Lamp Wiring Harness Installation Instructions appeared first on ToManual.com.


Viewing all articles
Browse latest Browse all 10

Latest Images

Trending Articles





Latest Images